STM32 B-L462E-CELL1 Cellular IoT Development Kit for Developing Smart Connected Devices

STM32 B-L462E-CELL1 Cellular IoT Development Kit

STMicroelectronics has introduced the B-L462E-CELL1 Discovery kit that combines critical hardware and software building blocks, including GSMA-certified embedded SIM (eSIM) to quickly develop power-conscious Cellular IoT devices that connect to the Internet through LTE-Cat M and NB-IoT networks. The kit features an ultra-small size all-in-one cellular module that includes ST’s ultra-low-power STM32L462 microcontroller, ST4SIM-200M GSMA-certified embedded SIM (eSIM), and an LTE-M/NB-IoT chipset.

 

Preprogrammed with the bootstrap connectivity profile, the kit leverages out-of-the-box data connectivity and enables remote SIM provisioning and SIM Over-The-Air updates. The kit uses the ST4SIM-200M eSIM solution based on the proven ST33 Arm SecurCore SC300 for strong resistivity against connectivity attacks. The onboard sensors such as LSM303AGR accelerometer-magnetometer, HTS221 relative humidity, and temperature sensor, and LPS22HH pressure sensors simplify the development of motion and environmental solutions. The device also includes a 0.96-inch OLED display, indicator LEDs, and a USB connection.

 

The B-L462E-CELL1 Discovery kit has been designed with ultra-low-power technologies in the STM32L4, which draws about 2µA in STOP 2 mode, and cellular chipset drawing less than 1.4µA in Power Saving Mode (PSM). The device acts as a platform to develop equipment with a battery life of up to 10-years for smart-city, smart-industry, smart-agriculture, smart-metering, and wearable applications. The B-L462E-CELL1 Discovery kit is available now. Budgetary pricing starts at $74.00.

 

Features of B-L462E-CELL1 Discovery kit

  • Ultra-low-power STM32L4 Series STM32L462REY6TR microcontroller based on the Arm Cortex-M4 core with 512 Kbytes of Flash memory and 160 Kbytes of RAM in a WLCSP64 package
  • 64 Mbytes of onboard Quad-SPI Flash memory from Micron, exclusive with the 1 MByte of Quad-SPI Flash memory inside the module
  • 16 Kbytes of I2C EEPROM (M24128-DFMN6TP) from STMicroelectronics
  • 0.96-inch 128 x 64 OLED screen with SPI interface
  • Low-power Audio CODEC with PCM bus and I2C interface
  • Flexible power-supply options: ST-LINK USB, User USB, UART USB, Power USB, or three AAA batteries
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  • End-to-end connectivity applications
  • Low‑power cellular network services from Truphone
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench, MDK-ARM, and STM32CubeIDE

 

Note: More technical information can be found in the B-L462E-CELL1 Discovery kit Databrief linked at the bottom of this page.

1 Comments

Hey I'm so happy I discovered your webpage, I actually observed you by error, while I had been researching on Askjeeve for another thing, Nevertheless I am listed here now and would the same as to say thanks a great deal for just a extraordinary article as well as a all round thrilling weblog (I also adore the theme/layout), I don’t have enough time to look through all of it with the moment but I have bookmarked it in addition to additional your RSS feeds, so After i have enough time I are going to be again to browse a great deal more, Please do keep up the great get the job done

Add new comment

The content of this field is kept private and will not be shown publicly.

Plain text

  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.