How to Control an LED with Raspberry Pi Webserver using Apache

Controlling an LED with Raspberry Pi Webserver using Apache

In this tutorial, we will install Apache web server in Raspberry Pi to control the LED from a webpage that can be accessed from anywhere over the internet. This is a basic tutorial with minimum features and it can be further modified to use this method in IoT-based home automation, remote control automation, robotics, etc.

Here we control an LED connected to Raspberry Pi by using Apache web server. For this, we create an HTML/php web page which has two buttons - one for turning on the LED and the second for turning off the LED.

 

Components Required

  1. Raspberry pi board (With Raspbian operating system)
  2. LED
  3. 250-ohm resistor
  4. Jumper Wires

 

An SSH client (Putty) is used to connect the Raspberry pi using a Laptop or computer. For this, the raspberry pi needs to be connected to a network via LAN or Wi-Fi. If you have a separate monitor for your raspberry pi, then it's better to connect raspberry pi with the monitor and you don’t have to use any SSH client.

 

Controlling LED using Raspberry Pi Webserver

Step 1: Connections

Raspberry Pi LED Connection Circuit

The connections in this project are quite simple - the positive pin of LED is connected to GPIO 27 pin and the negative pin to a 270 ohm resistor, the other side of which is connected to GND pin.

 

Step 2: Installing WiringPi Library

WiringPi is a PIN-based GPIO access library written in C for the BCM2835, BCM2836, and BCM2837 SoC devices used in all Raspberry Pi versions. It’s released under the GNU LGPLv3 license and is usable from C, C++, and RTB (BASIC) as well as many other languages with suitable wrappers.

1. First we will update our Pi with the latest versions of Raspbian using the command:

sudo apt-get update

 

2. Now we will install git by using this command:

sudo apt-get install git-core

 

3. Now obtain WiringPi using git by this command:

git clone git://git.drogon.net/wiringPi

 

4. Then install WiringPi library using:

cd wiringP./build

 

Step 3: Installing a Web Server

Apache is a very popular webserver, designed to create web servers that have the ability to host one or more HTTP-based websites. Apache Web Server can be enhanced by manipulating the code base or adding multiple extensions/add-ons. In our project, we are using an HTTP server and its PHP extension.

To Install Apache web server, we will use the following commands:

First, update the available packages:

sudo apt-get update

 

Now, install the apache2 package by using this command in the terminal:

sudo apt-get install apache2 -y

 

To test the web server whether it is working or not, go to your browser and type the Pi’s IP address in the tab.

To find the Pi's IP address, type ifconfig at the command line.

By default, Apache puts a test HTML file in the web folder. This default web page is served when you browse to http://192.168.1.31 (whatever the Pi's IP address is) from another computer on the network.

Browse to the default web page either on the Pi or from another computer on the network and you will see the following:

Apache2 Webserver

This means the Apache web server is working.

 

Now we will see how to change the default web page with your own HTML page

This default web page is just an HTML file on the filesystem. It is located at var/www/html/index.html.

Navigate to this directory in a terminal window and have a look at what's inside:

cd  var/www/html
ls -al
This will show you:
total 12
drwxr-xr-x  2 root root 4096 Jan  8 01:29 .
drwxr-xr-x 12 root root 4096 Jan  8 01:28 ..
-rw-r--r--  1 root root  177 Jan  8 01:29 index.html

 

This shows that by default there is one file in /var/www/html/ called index.html and it is owned by the root user. To edit the file, you need to change its ownership to your own username. Change the owner of the file using:

Sudo chown pi: index.html.

 

You can now try editing this file and then refresh the browser to see the web page change.

 

Install PHP in Raspberry Pi  

Now if we want to use PHP code along with HTML, then we have to further install the PHP extension in Raspberry pi. Using PHP code, we can create shell commands to control the LED from the PHP script.

To allow the Apache server to edit PHP files, we will install the latest version of PHP and the PHP module for Apache. Use the following command in terminal to install these:

sudo apt-get install php libapache2-mod-php -y

 

Now remove the default index.html file:

sudo rm index.html

 

And create your own index.php file:

sudo nano index.php

 

Now enter the below code in index.php to test the PHP installation.

<?php phpinfo(); ?>

 

Save it by pressing CTRL + X and the ‘y’ and enter. Now refresh the webpage in your browser, you will see a long page with lots of information about PHP. This shows that the PHP extension is installed properly. If you have any problem with the pages or if the pages do not appear, try reinstalling the apache server and its PHP extension.

 

Step 5: Start Coding for controlling GPIO pin using this Raspberry Pi Webserver

Now delete the previous code in index.php (<?php phpinfo(); ?>) file and insert below PHP code to control GPIO pins inside body of HTML code.

Below is the complete code for creating two buttons to turn on and off the LED connected to Raspberry Pi.

<html>
<head>
<meta name="viewport" content="width=device-width" />
<title>Raspberry Pi WiFi Controlled LED</title>
</head>
       <body>
       <center><h1>Control LED using Raspberry Pi Webserver</h1>      
         <form method="get" action="index.php">                
            <input type="submit" style = "font-size: 14 pt" value="OFF" name="off">
            <input type="submit" style = "font-size: 14 pt" value="ON" name="on">
         </form>​​​
                         </center>
<?php
    shell_exec("/usr/local/bin/gpio -g mode 27 out");
    if(isset($_GET['off']))
        {
                        echo "LED is off";
                        shell_exec("/usr/local/bin/gpio -g write 27 0");
        }
            else if(isset($_GET['on']))
            {
                        echo "LED is on";
                        shell_exec("/usr/local/bin/gpio -g write 27 1");
            }
?>
   </body>
</html>

Raspberry Pi Webserver

In the above code there is a PHP script which checks which button is pressed by using below code and then turns on and off the LED accordingly.

<?php
    shell_exec("/usr/local/bin/gpio -g mode 27 out");
    if(isset($_GET['off']))
        {
                        echo "LED is off";
                        shell_exec("/usr/local/bin/gpio -g write 27 0");
        }
            else if(isset($_GET['on']))
            {
                        echo "LED is on";
                        shell_exec("/usr/local/bin/gpio -g write 27 1");
            }
?>

 

Here we have used shell_exec() command in php code, this command is used to run the shell command from the PHP script. Learn more about shell_exec here. If you run the command inside shell_exec directly form the terminal of Raspberry pi, you can directly make GPIO pin 27 low or high. Below are two commands to test the LED directly from terminal.

/usr/local/bin/gpio -g write 27 0
/usr/local/bin/gpio -g write 27 1

 

After completing this, run the code in your browser by typing the IP address of raspberry pi in the browser. You will see 2 buttons - ON, OFF to control your LED by clicking these buttons.

 

I hope you liked this article. You can also check out our other Internet of Things projects.

2690 Comments

I'm truly enjoying the design and layout of your website.
It's a very easy on the eyes which makes it much more enjoyable for me to
come here and visit more often. Did you hire out
a designer to create your theme? Superb work!

Do you mind if I quote a couple of your articles as long as I provide credit and sources back to your website?
My blog is in the very same area of interest as yours and my visitors would really benefit from some of the information you provide here.
Please let me know if this alright with you.
Thank you!

Can I just say what a comfort to discover someone who really understands what they're talking about on the internet.

You certainly know how to bring an issue to light and make it
important. More and more people must read this and understand
this side of the story. I was surprised that you are not more
popular since you certainly have the gift.

Do you mind if I quote a couple of your posts as long as I
provide credit and sources back to your weblog? My website is in the exact same niche as yours and my visitors would genuinely benefit from
some of the information you provide here. Please let me know if this okay
with you. Many thanks!

I've been exploring for a little for any high quality articles or blog posts on this
kind of space . Exploring in Yahoo I eventually stumbled
upon this web site. Reading this info So i'm glad to express that I have an incredibly
excellent uncanny feeling I found out just what I needed.
I so much definitely will make sure to do not forget this website and provides it a look regularly.

Attractive section of content. I just stumbled upon your weblog and in accession capital
to assert that I get actually enjoyed account your blog posts.
Any way I'll be subscribing to your feeds and even I achievement
you access consistently quickly.

Hello, I think your website might be having browser compatibility issues.
When I look at your blog site in Ie, it looks fine but when opening in Internet Explorer,
it has some overlapping. I just wanted to give you a quick heads up!
Other then that, amazing blog!

Just want to say your article is as astonishing.
The clarity in your post is just cool and i can assume you are an expert
on this subject. Fine with your permission let me to grab your RSS
feed to keep updated with forthcoming post. Thanks a
million and please keep up the gratifying work.

Its like you learn my mind! You seem to understand
a lot approximately this, such as you wrote the e book in it or
something. I feel that you could do with a few p.c.

to pressure the message home a little bit, however other than that,
this is magnificent blog. A fantastic read. I'll certainly be back.

I don't even know how I ended up here, but I thought this
post was good. I do not know who you are but definitely you are going to a famous blogger if you are not already
;) Cheers!

Hey there fantastic website! Does running a blog similar to this take a
massive amount work? I've virtually no expertise in computer programming but I was hoping
to start my own blog soon. Anyway, if you
have any suggestions or techniques for new blog owners please share.
I know this is off topic however I simply had to ask. Many thanks!

Excellent post. I was checking continuously this blog
and I am impressed! Very useful information particularly the
last part :) I care for such information much.

I was looking for this certain info for a very long time. Thank you
and good luck.

Hey! I understand this is sort of off-topic however I needed to ask.

Does building a well-established website such as yours take a lot
of work? I am brand new to operating a blog but I do write in my journal everyday.
I'd like to start a blog so I can share my personal
experience and feelings online. Please let me know if you have any suggestions or tips for brand new aspiring blog owners.
Appreciate it!

I do not know whether it's just me or if everybody else experiencing problems with your website.
It appears like some of the text in your content are running
off the screen. Can somebody else please provide feedback and let me know if this is happening to them as well?
This could be a issue with my internet browser because I've had
this happen before. Kudos

What i do not realize is actually how you're no longer really much more well-preferred than you
may be now. You're so intelligent. You understand
thus significantly with regards to this topic,
made me for my part imagine it from numerous
numerous angles. Its like men and women don't seem to
be interested unless it's one thing to accomplish with Girl gaga!
Your own stuffs nice. All the time care for it up!

I truly love your website.. Great colors & theme. Did you make this site
yourself? Please reply back as I'm hoping to create my very own blog and
would love to learn where you got this from or just what the
theme is named. Thank you!

Fantastic goods from you, man. I have understand your stuff
previous to and you're just too great. I actually like what you have acquired here,
certainly like what you are stating and the way in which you say it.

You make it enjoyable and you still care for to keep
it wise. I can not wait to read far more from you.
This is actually a wonderful site.

Add new comment

The content of this field is kept private and will not be shown publicly.

Plain text

  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.